Chassis for Class-A Vacuum Tube Hybrid Headphone Amplifier
Back in 2020 I release a nice hobby project here on PCBWay, a Class-A Vacuum Tube Hybrid Headphone Amplifier
A friend of mine designed a nice chassis, that can be easily 3D-printed at home.
After getting his green-light, I published the stl files here on PCBWay, so people can order both the PCB and the chassis with one order.
The stands are optional, if you decide to use them you need 4 of them.
The required screws are M1.4 type, 6mm length (if stands are not used) or 10mm length (if stands are used)
Chassis for Class-A Vacuum Tube Hybrid Headphone Amplifier
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(7)
More by Dario Murgia
-
BassCrab uHAT
Who I amHello PCBWay community, this is Dario. I am an Italian electronics engineer, with huge passi...
-
UART-to-RS232 RJ45 Serial Adaptor
Small adaptor / breakout board UART to RS232, with RJ-45 connector It is based on the popular MAX323...
-
Chassis for Class-A Vacuum Tube Hybrid Headphone Amplifier
Back in 2020 I release a nice hobby project here on PCBWay, a Class-A Vacuum Tube Hybrid Headphone A...
-
BassWasp HAT 2.0
BassWasp HATWho I amHello PCBWay community, this is Dario. I am an Italian electronics engineer, wit...
-
BassWasp HAT
Who I amHello PCBWay community, this is Dario. I am an Italian electronics engineer, with huge passi...
-
STM32F070 Breakout
Small breakout board based on STM32F070 microcontroller from ST Microelectronics.With this board one...
-
RockPi-S Ruby-HAT
Project descriptionRuby-HAT is an expansion board for Radxa RockPi-S. It's been designed to fit in a...
-
BassFly uHAT
Hello PCBWay community, this is Dario. I am an Italian electronics engineer, with huge passion for a...
-
BassOwl Lite - HiFi Stereo Bluetooth Speaker
Hello PCBWay community, this is Dario. I am an Italian electronics engineer, with huge passion for a...
-
TFA9894D I2S 5.6W Amplifier Breakout (Ver. A)
Hello PCBWay community, this is Dario. I am an Italian electronics engineer, with huge passion for a...
-
Class-A Vacuum Tube Hybrid Headphone Amplifier
Hello PCBWay community, this is Dario. I am an Italian electronics engineer, with huge passion for a...
-
Programmable Mist Maker - XIAO / QT PY Extension
1381 2 1 -
RadioHAT - Raspberry Pi radio development platform
1160 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3535 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4206 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4580 2 2
