|
KiCADKicad
|
BulkyMIDI-32 Module (Faceplate FP2)
It's a faceplate for my BulkyMIDI-32 Module, it is mounted on the front of the unit - giving you a nice finish to the device. It is mounted on the panel module using screws and M3 nylon hex standoffs. Note that this version of the front panel (FP) was designed to fit a 1.3" OLED display. If you were planning on building the extras-board as well, you may instead prefer Faceplate FP1 as that accommodates for it as well.
As this is just a faceplate, check out the related shared projects for an overview of all things BulkyMIDI-32 (including adapters and other modules). In order to complete the BulkyMIDI-32 device itself, you may check out remaining modules for those needed to build one up (includes variations).
BulkyMIDI-32 Module (Faceplate FP2)
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Tor-Eirik Bakke Lunde
- BulkyMIDI-32 Extras BulkyMIDI-32 is based on the mt32-pi project, bringing you the all the auditory excellence that was ...
- ZX Interface 2.021 I've grown fond of cartridge formats in my later years, mostly because of the feeling you get by bro...
- MSX Mega Drive Adapter I've been playing around with my MSX computer recently, and as the computer itself supports a two bu...
- C64 Joystick Adapter (Faceplate) A rather stylish looking faceplate to go with the C64 Joystick Adapter, it covers up most of the ele...
- C64 Joystick Adapter I recently bought a Raspberry Pi for use with emulators on modern systems, and so I wanted an easy w...
- CPC464 Joystick Splitter (Faceplate A1) I made a simple joystick splitter for the Amstrad CPC 464 on a simple PCB, so I thought - why not ma...
- CPC464 Joystick Splitter Simple passive device that breaks out the joystick port on the Amstrad CPC 464 computer so that two ...
- Apple 2 Prototyping Card (fullsize) I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
- Apple 2 Prototyping Card (small) I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
- C64 Pi1541-II Faceplate (variant B) The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 JoyKEY (Sega Master System adapter) With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
- C64 JoyKEY (Atari 7800 adapter) With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
- C64 Pi1541-II Backplate The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 Pi1541-II Faceplate (variant A) The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 Pi1541-II Module The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 Pi1541-III Faceplate (FB2) The C64 Pi1541-III is a modern solution for emulating a disk drive for a vintage Commodore 64 comput...
- C64 Pi1541-III Faceplate (FB1) The C64 Pi1541-III is a modern solution for emulating a disk drive for a vintage Commodore 64 comput...
- C64 Pi1541-III Faceplate (FP1) The C64 Pi1541-III is a modern solution for emulating a disk drive for a vintage Commodore 64 comput...
-
RPI - 8 IO PLC With ATTiny85 Watch Dog
112 0 0 -
Nintendo Famicom HVC-001 Controller Shells
161 0 1 -
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
166 0 2 -
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
192 0 2 -
-
-
-
TEKTRONIX THS710,THS720,THS730 LED Backlight drop in replacement Controller
554 0 0