|
KiCADKicad
|
Breadboard power rail bridge
A simple little strip with headers to plug into the power rails of a breadboard, connecting them together with relief cutouts for components. Eliminates the need to connect power rails with wires. Only parts needed to build are 8 pieces of 2x5 male pinheader.
Included project source files are from KiCad 6.0
Breadboard power rail bridge
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Dan Danbo
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
19 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
261 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1188 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
690 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3189 2 4 -
RadioHAT - Raspberry Pi radio development platform
2701 0 4
