Breadboard PowerSupply
In this project, I build a Breadboard power supply adaptor. The adaptor gets input of up to 9V from the barrel jack connector. On the other side, the adaptor connects to the Breadboard power rails. In each power rail, you can choose the output power (3.3V or 5V).
Breadboard PowerSupply
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Shay Barnea
-
Programmable Mist Maker - XIAO / QT PY Extension
1224 2 1 -
RadioHAT - Raspberry Pi radio development platform
1029 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3441 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4075 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4470 2 2
