|
KiCad 9.0 |
Another 8-bit ISA prototyping board with bus strips
Another 8-bit ISA prototyping card. This one has power busses around the perimeter of the board as well as multiple power busses spaced throughout the board. The tie points are also connected in groups of 3 or 4 similar to a breadboard or an old-fashioned strip board. See the picture of the PCB layout for clarity. The groups are only connected by traces on the backside of the board so they can be cut it is necessary to cut them for some reason.
There is space of an optional header that breaks out and labels all the signals from the ISA bus. These is also space in the corner for an optional AMS1117-3.3 regulator circuit if your project needs 3.3V power.
Another 8-bit ISA prototyping board with bus strips
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by Dylan
-
Another 8-bit ISA prototyping board with bus strips
Another 8-bit ISA prototyping card. This one has power busses around the perimeter of the board as w...
-
Yet Another 8-Bit ISA prototype board
Yet another prototyping board for making circuits that can plug into an 8-bit ISA bus. This one has ...
-
ISA Card with XTIDE ROM/Disk on Chip/USB
I designed this card for my personal use with the intended purpose of being able to use it to be abl...
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
40 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
269 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1204 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
699 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3204 2 4 -
RadioHAT - Raspberry Pi radio development platform
2717 0 4
