500mW PA for SX1255 boards
500mW PA for SX1255 with TQP7M9106
With this PA the direct signal from SX1255 should be amplified around 400~500 mW clean Tetra signal.
Board thickness is 0.8mm
500mW PA for SX1255 boards
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Dragan Spiroski
-
500mW PA for SX1255 boards
500mW PA for SX1255 with TQP7M9106With this PA the direct signal from SX1255 should be amplified aro...
-
BIG PA-SPOT (SX1255 HAT)
This is upgraded "Little PA" board with better RF-PA chip with more RF power.
-
mHAT V2 (SX1255 mini HAT)
SDR Transceiver for digital and analog modes include Tetra-TMO
-
Little PA V2 (SX1255-HAT)
SDR Transceiver for digital and analog modes include Tetra-TMO
-
SX1255 HAT_Little PA
https://github.com/labdvm/SX1255-Tetra-TMO-HS-HAT/tree/main/HAT%20with%20PA
-
Programmable Mist Maker - XIAO / QT PY Extension
2173 2 2 -
RadioHAT - Raspberry Pi radio development platform
1857 0 4 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
4057 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4808 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5612 2 2 -
