Product Description
PN532 NFC HAT for Raspberry Pi, I2C / SPI / UART
Overview
- This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz frequency range. It supports three communication interfaces: I2C, SPI, and UART.
- NFC (Near Field Communication) is a wireless technology allows contactless point-to-point data communication between devices within a short distance of 10 cm. It is widely used in applications such as access control system, smart tickets, meal card, etc.
- Based on the popular NFC controller PN532 with multi interface options, this HAT will easily enable NFC function for your Raspberry Pi.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Onboard PN532 chip, supports various NFC/RFID cards like MIFARE/NTAG2xx, etc.
- Three interface options: I2C, SPI, and UART, configured via jumpers and switches
- Breakout control pins, for easily connecting with host boards like STM32/Arduino
- Comes with development resources and manual (examples for Raspberry Python/C, STM32, Arduino)
Specifications
- NFC controller: PN532
- Operating voltage: 3.3V/5V
- Operating frequency: 13.56MHz
- Communication interfaces: I2C, SPI, UART (default)
- Default baudrate: 115200 bps
- Operating modes:
- reader/writer mode supporting ISO/IEC 14443A / MIFARE scheme
- reader/writer mode supporting FeliCa scheme
- reader/writer mode supporting ISO/IEC 14443B scheme
- card operation mode supporting ISO 14443A / MIFARE scheme
- card operation mode supporting FeliCa scheme
- card operation mode supporting ISO/IEC18092, ECM340 point-to-point
Applications
- Contactless payment system
- Bluetooth and WiFi devices chaining
- Social sharing function like sharing contacts, photos, and videos
- Smart phone NFC app
What's on Board
- Raspberry Pi GPIO connector: for connecting with Raspberry Pi
- PN532 control pins: for connecting with other host boards like STM32
- NFC induction coil
- PN532 chip: NFC controller
- Power indicator
- DIP switches: for configuring the connection between PN532 and Raspberry Pi (only one of the I2C/SPI/UART can be connected at the same time)
- Mode selection:
- I0-L, I1-L: enable UART
- I0-H, I1-L: enable I2C
- I0-L, I1-H: enable SPI
8.INT0 jumper: response signal, connects to Raspberry Pi D16
9.RSTPDN jumper: reset signal, connects to Raspberry Pi D20
Dimensions
Development Resources
Wiki : https://www.waveshare.com/wiki/PN532_NFC_HAT
Shipping list:
Note: Raspberry Pi is NOT included.
- PN532 NFC HAT x1
- MIFARE Classic 1K Card x1
1
2
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
The OpenMV4 H7 Plus 500W HD Intelligent Camera is an authentic AI image processing neural network$85.00 or 10200 BeansRedeem Now
-
-99%PCBWay MPU-6050 Module 6DOF Three-Axis Accelerometer Gyroscope Module GY-521$0.01 or 240 BeansRedeem Now
-
-
-
-
-
-
-
-
-
-
-