Shiny Li
Jan 19,2016
587
Analog In-circuit Test
A system measuring component values on a populated PCB before power is applied.
Shiny Li
Jan 19,2016
640
Analog Functional Test
At the board level, various analog test signals are applied to a PCB through a switch to point out curren...
Shiny Li
Jan 19,2016
721
Analog Circuit
A circuit comprised primarily of individual (discrete) components, such as resistors, capacitors, diodes, transistors, etc. T...
Shiny Li
Jan 19,2016
651
Analog Circuit Simulator
A tool used to verify the design (or portions thereof) in the analog domain by applying virtual test signals&n...
Shiny Li
Jan 19,2016
678
Ambient
The surrounding environment coming into contact with the system or PCB in question.
Shiny Li
Jan 19,2016
623
Alkyd
A thermosetting resin with good electrical properties used for moulding the bodies of components.
Shiny Li
Jan 19,2016
645
Algorithm
A procedure for solving a problem, usually mathematical.
Shiny Li
Jan 19,2016
1418
Air Gap
The non-conductive air space between current carrying conductors such as traces, pads, ground planes, etc.
Shiny Li
Jan 19,2016
710
Aging
The change of a property, e.g. solderability, with time.
Shiny Li
Jan 19,2016
739
Adhesive
A substance such as glue or cement used to fasten objects together. In surface mounting, an epoxy adhesive is&...
Shiny Li
Jan 19,2016
756
Adhesion Layers
The metal layer that adheres a barrier metal to a metal land on the surface of an integrated circuit.
Shiny Li
Jan 19,2016
636
Additive Process
A process for obtaining conductive patterns by the selective deposition of conductive material on a clad or unclad&...
Shiny Li
Jan 19,2016
594
Activating
A chemical treatment for conditioning the surface of non-conductive materials for improved adhesion.
Shiny Li
Jan 19,2016
620
Accuracy
The deviation of the measured or observed value from the accepted reference.
Shiny Li
Jan 19,2016
650
Access Holes
A series of holes in successive layers. Each set has a common centre or axis. The holes of a multi-layer&...
Shiny Li
Jan 19,2016
709
Accepted Quality Level (AQL)
The maximum number of defects per 100 units that can be considered satisfactory as a process average.
Shiny Li
Jan 13,2016
575
Acceptance Test
The tests that determine the acceptability of boards as agreed to by purchaser/vendor.
PCBWay
Nov 04,2015
248
Basic Oscillatory Circuits
Basic Oscillator Circuit The oscillatory circuit, also called the L-C circuit or tank circuit, consists of an inductive coil of inductance L connected in parallel with a capacitor of...
PCBWay
Nov 04,2015
316
90 W audio power amplifier based on transistor
Using only four transistors in the quasi-complementary amplifier configuration, this transistor power amplifier circuit can deliver 90W of power into 4 ohm loads and at low cost. As shown in ...
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 5 |
| 2 | Engineer | 2 |
| 3 | Engineer | 1 |
| 4 | sheng wang | 1 |
