Shiny Li
Jan 28,2016
1141
Outgassing
The gaseous emission from a laminate printed board or component when the board or the printed board assembly is exposed to heat or reduced air pressure or both.
Shiny Li
Jan 28,2016
1084
Organic Activated (OA)
A water-soluble flux using organic acids as activators.
Shiny Li
Jan 28,2016
1229
Open
An area of a bare PCB which, due to over-etching or fabrication problems, separates two electrically connected points.
Shiny Li
Jan 28,2016
1272
Omegameter
A test instrument measuring ionic residues on PCBs via the drop of resistivity over a specific time.
Shiny Li
Jan 28,2016
1210
Non-wetting
A condition whereby a surface has contacted molten solder, but has had none of the solder adhere to it.
Shiny Li
Jan 28,2016
1217
Non-polar Compound
Material having electrical charges distributed over the surface of the molecule, thereby showing an electrical effect in solution.
Shiny Li
Jan 28,2016
2109
Non-functional Land
A land on internal or external layers, not connected to the conductive pattern on its layer.
Shiny Li
Jan 28,2016
1204
Non-conductive Pattern
A configuration formed by functional non-conductive material of a printed circuit.
Shiny Li
Jan 28,2016
1381
Non-conductive Epoxy
An epoxy resin with or without a filler, which may be added to improve thermal conductivity.
Shiny Li
Jan 28,2016
1199
Non-clean solder
A process using specially formulated low-solid solder pastes whose residues require no cleaning.
Shiny Li
Jan 28,2016
1286
Node
A pin, lead or even junction which will have at least one wire connected to it.
Shiny Li
Jan 28,2016
1241
Neutralizer
An alkaline chemical added to water to improve its ability to dissolve flux residues.
Shiny Li
Jan 28,2016
1790
Netlist
A net is a junction of component nodes. A netlist is a collection of nets that define all the connections in a circuit. It is obtained automatically from a schematic capture program.
Shiny Li
Jan 28,2016
633
Negative–acting Resist
A resist which is polymerized (hardened) by light and which, after exposure and development remains on the surface of a laminate in those areas which were under the transparent parts of a production ,...
Shiny Li
Jan 28,2016
978
Negative (Noun)
An artwork, artwork master, or production master in which the intended conductive pattern is transparent to light, and the areas to be free from conductive material are opaque.
Shiny Li
Jan 28,2016
2037
Nail Heading
The flared condition of copper on the inner conductor layers of a multi-layer board usually caused by hole drilling.
| Ranking | Name | Answers |
|---|---|---|
| 1 | (DIY) C64iSTANBUL | 1 |
