Control Nodemcu With Wi-Fi

Wi-Fi Remote control


Today we are  going to talk  about how to build a remote control that work on wifi.

The special of this is not needed for any internet connection or a Wi-Fi network.. That means it doesn't need any internet connection or any internet connection


This is what we work inside a wifi network to build ourselves. You can use this method to turn your home light, Fan on/off, assfuck, and more to control a toy car.


What is this Nodemcu saying........

Nodemcu says it's really very good and very

Effective it platform truly, Nodemcu is a

Development bord that made the esp8266 wifi chip..

There are lots of development bord like this..

Nodemcu is just one of these. That means

1,2,3,4,5,6,7,8,9,,10,11,12,  12E, 12f and and esp32 are in 1,2,3,4,5,6,7,8,9,10,11,12f and esp32.. This is the microcontroller in Nodemcu

That means when we program the arduino program, this is how the program is happening here. In addition to general microcontroller here the model of Wi-Fi related to WiFi is also inside of this special area. The chip called the 12e is in the Nodemcu, we use the most of these products to use

Let's see what's special in this Nodemcu..

*operating Voltage : 2.5v - 3.6V

*operating current average value :80mA

*operating Temperature Range :- 40°C-125C

*CPU: Tensilica L106 32-bit processor

*CPU clock speed :80MHz

* GPIOs: 17(PWM 4)

*Analog input pin:1

*EEPROM:4KB

*WIFI PROTOCOLS: 802.11 b/g/n


Seen a lot of people have said basic thing about Nodemcu so I'm not going to say anything more than this..

So we can both these developments bord to program using the arduino Ide..


Before we work in Nodemcu we need to install Nodemcu bord for the Arduino IDE. That mouth should be opended first and go to file > conference..

Then in the next window, the place called the additional manager code.

http://arduino.esp8266.com/stable/package_esp8266com_index.json

Paste the text that stays and ok.

You need internet for work here, now after you connect to the internet, go to the tools _boards manger

Then click the button that will be open by choosing esp8266 from the window manager window..




IoT




Thanks so much for watching


Please subscribe My youtube channel Friends


https://www.youtube.com/channel/UCo9z6MOxNNOTdXKgcoexHQg



Thanks pcbway



Apply for sponsorship >>
524 Projects Sponsored
Oct 01,2019
398 viewsReport item
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More
    x
    mm
    Earn a $5 Welcome Bonus