|
KiCADKicad
|
ezPLA - C64 PLA replacelemt board
A while back I created a prototype board for the PLA replacement chip for C64. It was time to make a PCB out of it. In this blog post I describe the steps that I did to design the PCB using KiCad.
An updated PCB has been released by AdamT that has better compatibility with the C64 250407 board. Check out the fork on this GitHub repo for more details: https://github.com/Kayto/ezPLA-PCB
ezPLA - C64 PLA replacelemt board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(10)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Marek L
-
ezPLA - C64 PLA replacelemt board
A while back I created a prototype board for the PLA replacement chip for C64. It was time to make a...
-
Atari 800XL PCB remake v1.1
As a child I have owned an Atari 800XL. This 8-bit computer always had a special place in my heart. ...
-
Debounced clock
The most important part of a computer architecture is a clock circuit. This circuit has the option t...
-
Programmable Mist Maker - XIAO / QT PY Extension
1226 2 1 -
RadioHAT - Raspberry Pi radio development platform
1032 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3442 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4077 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4472 2 2
