basic speaker amp
I wanted to make a speaker Amplifier because my engineering teacher wanted us to mess around with Fusion 360 and i tried the PCB design. At first, I just messed around, but I learned what most functions and parts do. I have a lot of small speakers at home, and I don't want to waste them because they are useless without an amp. Using the Engineering Design Process, I have designed a speaker amplifier and this is the prototype. This project has taken many days and I know that it will take longer to test and redesign the PCB if there is a problem.
basic speaker amp
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
277 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
357 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1427 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
797 0 1
