|
|
RECOM R-78HE5.0-0.3 |
x 1 | |
|
|
1A bridge rectifier |
x 1 | |
|
|
5mm pitch screw terminal |
x 1 | |
|
|
40v 260 uF axial capacitor |
x 1 | |
|
|
4.7Kohms 1/4 watt (for 1-wire breakout) |
x 1 |
Wemos 6-24V AC/DC supply
This AC/DC shield will help you put your wemos style controller in HVAC setup where the standard supply is 24VAC. But you can also supply this DC power, making this shield very versatile thanks to the RECOM module. You'll notice that there's breakout pins for a 1-wire sensor, that's tied to D4 with a resistor location for the mandatory pull-up.
Wemos 6-24V AC/DC supply
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Simon-Pierre Gagnon
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
138 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
982 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
561 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3032 2 3 -
RadioHAT - Raspberry Pi radio development platform
2581 0 4 -
-
-
