Top
Waziup_Weather_Station_PCB_1v0
This Waziup_Weather Station PCB (v1.0) is a board to aid the assembly of the WAZIUP LoRa Weather Station using low-cost hardware that can communicate using LoRa network.
This work was done in the context of WAZIUP Research Project, which has received funding from the European Union’s H2020 Programme for research, technological development and demonstration under grant agreement No 687607.
Waziup_Weather_Station_PCB_1v0
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(3)
More by bruno.almeida
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
153 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1005 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
575 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3045 2 3 -
RadioHAT - Raspberry Pi radio development platform
2591 0 4 -
-
-
