Top Overlay
Bottom Overlay
Top Solder Mask
Bottom Solder Mask
Top Copper Layer
Bottom Copper Layer
Mechanical Layer 1
Bottom
Top
iSpindle V5.5
### DESCRIPTION
This pcb has been created as part of an open source electronic hydrometer to use in brewing beer and wine to give continous readigs og Specific Gravity and Temperature via wifi to your PC/Phone etc.
### TECHNICAL DETAILS / COMPONENTS
The board is designed to accommodate a Wemos D1 Mini along with a gyro board, Dallas 18b20 temp sensor and a charger board. The unit is powered via 18650 battery.
### LEARN / TOPIC / BUILD INSTRUCTIONS
iSpindle V5.5
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(3)
More by Bob
-
Programmable Mist Maker - XIAO / QT PY Extension
1224 2 1 -
RadioHAT - Raspberry Pi radio development platform
1029 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3441 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4076 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4471 2 2
