|
PTS815 SJK 250 SMTR LFSC&K
|
x 3 |
flex PCB with three buttons
This is one side flex PCB with three buttons, it has 4 holes on each side. The stiffener should be done on the hole pcb on one side and the thickness for the stiffener must be 0.25 mm. And double side tape "3M 467MP" as you can see in the photo.
flex PCB with three buttons
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
Programmable Mist Maker - XIAO / QT PY Extension
1014 2 1 -
RadioHAT - Raspberry Pi radio development platform
817 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3277 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3897 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4277 2 2
