altware_pager_gerber_v1
Touchscreen LoRa Pager for Off-Grid Texting & Tracking
This pager uses LoRa and meshing to help you communicate and share location within a private group of up to 90 devices. It's compatible with several other popular LoRa devices that utilize Blackout Comms firmware.
The PCB is designed to allow you to easily assemble carefully selected components that work well with the firmware and are also easy to solder into place.
The 3D printable enclosure allows you to decide whether you want GPS, an internal or external antenna, and more options coming.
altware_pager_gerber_v1
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Matthew Calhoun
-
Programmable Mist Maker - XIAO / QT PY Extension
1837 2 2 -
RadioHAT - Raspberry Pi radio development platform
1565 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3797 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4549 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5350 2 2 -
