NavTag v3_design
The Navlight system is used for adventure racers doing navigation courses such as orienteering or rogaining. The Tag is one of the components, and is set in a plastic housing and worn on your wrist. Other components include the Punch, and a Reader.
This is open source so anyone can make the PCB
NavTag v3_design
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(0)
More by Peter Squires
-
NavTag v3_design
The Navlight system is used for adventure racers doing navigation courses such as orienteering or ro...
-
W309471AX1N33_Punch V10
A battery-powered data logger designed specifically for use with Navlight tags, The tags are worn by...
-
smart "charging box" project
This is one of four PCBs which combine to make a smart "charging box" for inductively charging the b...
-
Programmable Mist Maker - XIAO / QT PY Extension
965 2 0 -
RadioHAT - Raspberry Pi radio development platform
782 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3237 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3861 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4224 2 2
