|
MJ-3502CUI Devices
|
x 2 | |
|
|
PH2RA-08-UA 2 row 8 position pin headerAdam Tech or equivalent
|
x 1 |
|
KiCADKicad
|
W249069ASZ7_Gerbers
For EuroRack audio synthesizer modules, vertical audio input jacks are more natural, but they are also large, forcing you to use up precious width in your rack. I used a small sideways-mount jack to keep the overall board size down to 3 hp, or 15mm (under 5/8" )
These units can be mounted side by side, or up and down. The units connect to the underlying PCB using right-angle headers, connecting to female sockets. Spacers or standoffs are needed for the mechanical connect between the top panel and the lower PCB.the
W249069ASZ7_Gerbers
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Tom Legrady
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
32 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
265 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1197 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
695 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3197 2 4 -
RadioHAT - Raspberry Pi radio development platform
2708 0 4
