|
|
USB1061-GF-L-A |
x 1 | |
|
|
100SP4T1B1M2QEH |
x 4 | |
|
|
SQMW310RJTE-Connectivity
|
x 4 |
|
KiCADKicad
|
USB Test Load
It works by plugging it into the female USB-A Port of a USB Tester and by switching 1 to 4 of the switches, you can test the USB Charger/PowerBank by loading it with this Test-Load, With one switch, it uses 500 mA, two Switches on means 1 A, three means 1.5 A, and four means 2 A, using this in combination with a USB Voltmeter and Ammeter, you can verify your Charger/PowerBank
USB Test Load
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by LoLGamer 5482
-
Programmable Mist Maker - XIAO / QT PY Extension
1226 2 1 -
RadioHAT - Raspberry Pi radio development platform
1032 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3442 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4078 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4472 2 2
