|
Autodesk Fusion 360Autodesk
|
Turbine for model jet engine
I was working on building my own model jet engine and needed a cheap solution to make the turbine. Machining would have been far to expensive for my budget so I tried 3d printing in metal. It worked out very well and it was way cheaper. I recommend trying the 3d printing services in metal out.
Turbine for model jet engine
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Adrian Messner
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
33 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
267 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1200 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
697 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3198 2 4 -
RadioHAT - Raspberry Pi radio development platform
2712 0 4
