Sovol SV08 Nozzle Adapter
This is still a POC and i didn't tested it yet, soon i get them, i will report if it works.
The original heat block was modified so that a Creality Volcano nozzle can be screwed in.
This way, you have a wide selection of nozzles and are using an established standard.
Sovol SV08 Nozzle Adapter
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Manuel Gaschler
-
Programmable Mist Maker - XIAO / QT PY Extension
1021 2 1 -
RadioHAT - Raspberry Pi radio development platform
828 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3280 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3904 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4281 2 2
