|
KiCADKicad
|
SCART Breakout Board
This product was designed to help diagnosing SCART devices, as well as to allow access to signal lines that might be interesting to play around with. I came up with this design when I found myself with a B&O BeoCord VX7000 which only receives commands through SCART, and no compatible TV to go along with it.
The D2B Bus, aspect ratio/STB auto recording line and Composite/RGB selection line all have separate breakout points which are not directly connected to the other side of the connector, since intercepting these signals and perpetuating others might be required for your project.
SCART Breakout Board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Ashley Verburg
-
Programmable Mist Maker - XIAO / QT PY Extension
1226 2 1 -
RadioHAT - Raspberry Pi radio development platform
1032 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3444 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4078 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4472 2 2
