|
KiCad 9.0 |
Rotorflight M1 FC-ESC Stack——FC
Note from PCBWay: This page corresponds to the FC board only. If you need the ESC board, please check Rotorflight M1 FC-ESC Stack——ESC.
This project contains the complete open-source design for a two-stack flight controller designed to fit the OMPHOBBY M1. All hardware and firmware files are provided to enable manufacturing, modification, and further innovation within the Rotorflight and ESCape32 communities. Note that both designs are included in this project and both must be produced for a completed product.
View the GitHub repository for details and download of design files.
https://github.com/BladeScraper-Designs/Rotorflight-M1-FC-ESC-Stack/tree/main
Rotorflight M1 FC-ESC Stack——FC
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(1)
More by Keith Williams
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
51 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
271 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1210 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
704 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3206 2 4 -
RadioHAT - Raspberry Pi radio development platform
2719 0 4
