Top Overlay
Top Paste Mask
Top Solder Mask
Mechanical Layer 1
Bottom Overlay
Bottom Paste Mask
Bottom Solder Mask
Bottom Copper Layer
Bottom
Roboy Darkroom: Vive Tracker Photodiodes 4x4
### DESCRIPTION
A photodiode for detecting pulses from the HTC Vive Base Station.
### TECHNICAL DETAILS / COMPONENTS
Link to Mouser Cart for ONE 16x16 board.
https://www2.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8d1d213556
### LEARN / TOPIC / BUILD INSTRUCTIONS
Here is the source KiCad files for this photodiode board
https://github.com/Roboy/HTC_Vive_Sensors
Here is the FPGA code to interface with the photodiode board.
https://github.com/Roboy/roboy_fpga_code
Here is the ROS code to publish data from the FPGA as ROS topics.
https://github.com/Roboy/DarkRoom
Here is the Rviz for visualizing the ros topics.
https://github.com/Roboy/DarkRoom_rviz
Here is the Hackaday Page about the Project
https://hackaday.io/project/19570-htc-vive-lighthouse-custom-tracking
Roboy Darkroom: Vive Tracker Photodiodes 4x4
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(2)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Nora Kazour
-
Roboy Darkroom: Vive Tracker Photodiodes 4x4
### DESCRIPTIONA photodiode for detecting pulses from the HTC Vive Base Station.### TECHNICAL DETAIL...
-
Almond Board v1.2
### DESCRIPTIONThe Almond Board v1.2 by OpenBionics. For more information visit https://www.openbion...
-
gerb_smd project
### DESCRIPTIONA tracker board for use with an FPGA and the HTC Vive Base Stations### TECHNICAL DETA...
-
-
-
-
-
-
-
-
ESP32-S Development Board, in "Arduino Uno" form factor
3158 4 10
