|
|
FreeCADFree Software Foundation, Inc.
|
Revel Kit battery latch
Part got broken during use and no longer available on manufacturer's website.
This is the first model and print of the part. Part modeled to physical dimensions. Printed part required light sanding with 150 grit around the square holes, around the rectangular base and the spring cylinder for correct fitting. After that It works perfectly. Wanted to CNC mill the part in aluminum but it was too expensive. Went for aluminum SLM.
Revel Kit battery latch
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Manuel Ortega
-
Programmable Mist Maker - XIAO / QT PY Extension
1014 2 1 -
RadioHAT - Raspberry Pi radio development platform
817 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3277 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3897 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4277 2 2
