|
KiCad 8.0KiCad
|
RepRapFirmware WiFi + Motor Expansion Adapter for SKR 1.x
I designed this because Peter Roß's version of this Adapter is no longer for sale, and I thought why not try to make it more compact.
This board has a few limitation, you should be aware about:
- Because the ESP uses some of the Pins from the expansion header only two Steppers can be used on the Motor Expansion board. Also the diagnostic pins are not connected, but I exposed the pins to a header so you can hook them up with jumper cables if you need them.
- The IDC Connectors are placed below the ESP. This allows the Board to be very compact, however you can't use IDC Cables, and have to use female IDC connectors which can be a bit more expensive.
RepRapFirmware WiFi + Motor Expansion Adapter for SKR 1.x
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
77 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
283 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1230 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
713 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3220 2 4
