|
Autodesk Fusion 360Autodesk
|
|
|
arduino IDEArduino
|
Prototype Iron Man Repulsors
Now you can print and create your very own prototype repulsor from Iron Man! These models were design from the various shots from the film to replicate the look of the first repulsors Tony Stark created when he was first learning to fly!
I've uploaded both the STEP files, so you an modify, and the STL files so you can go straight to 3D printing.
Once the full video is released, I will upload both the BOM and the source code for you to build your own!
Prototype Iron Man Repulsors
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Kris Kersey
-
Programmable Mist Maker - XIAO / QT PY Extension
1261 2 1 -
RadioHAT - Raspberry Pi radio development platform
1077 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3475 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4124 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4503 2 2
