VOTE NOW!
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Design 1/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Usability 2/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Creativity 3/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Content 4/4

This small pcb was designed to adapt new AS3372 SOIC24 clones to DIP18 socket specifically for Sequential Circuits Prophet 600 (but they will work for any board). The shaped cuts of the pcb are due to some condensers placed on the synth pcb near the socket.

You just solder pins on the holes from the bottom side to sit on the dip18 socket, taking care to cut the pins 10-15 coming out from the pcb because over them will be placed the SMD AS3372 clone.


Hope this will be useful for somebody

Have fun with your cem adapter!

Bill of materials used in this project

1x9 pins row 2.54 spaced
2
AS3372 CEM clone SOIC24
1
Oct 09,2019
37 viewsReport item
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More