Mousa Simple Projects
UNITED STATES OF AMERICA • + Follow
Description
Power Saving Circuit for TV and Satellite / Smart Switch
This is Power Saving Circuit, it can be used for any electronic and electric devices that have to turns ON and OFF together at the same time, such as TV and Satellite or PC Monitor and tower(system unit). So it helps to power saving by prevent leaving one of them running all day long.
Maximum load can be 4A if you using a proper heatsink for the SCR.
Youtube Video: https://youtu.be/CmBkmEKcafI
Parts list:
SCR C106
Current transformer 5A/5mA
Capacitor 10uF
Bridge diode
Resistor 20K
Resistor 100K
Multiturn Potentiometer 500K
Diode 1N4148
Terminal connector 2PIN
Oct 01,2019
1,398 views
Power Saving Circuit for TV and Satellite / Smart Switch
2 Layers PCB 20 x 31 mm FR-4, 1.6 mm, 1, HASL with lead, Yellow Solder Mask, White silkscreen
Power Saving Circuit
1398
1
0
Published: Oct 01,2019
Standard PCB
PCBWay Donate 10% cost To Author
Only PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Mousa Simple Projects
-
Tester for Touch Screen Digitizer without using microcontroller
By using this circuit you can Test the 4-wire Resistive Touch Screen Digitizer sensor without using ...
-
3 phase Motor and Phase Sequence Indicator / Rotation Tester
This is a DIY Three Phase Sequence Indicator / Rotation Tester Circuit, 3D printed file and parts li...
-
Ultrasonic distance meter without microcontroller
This circuit is an ultrasonic distance meter without using microcontroller.Distance range for this c...
-
Digital Resistance Meter without microcontroller
Digital Resistance Meter without microcontrollerCircuit and parts list: https://www.mousa-simple-pro...
-
Voltage Regulator LR8
This is a Voltage regulator with high input voltage up to 450V DC using IC LR8N3Maximum output curre...
-
DC UPS for Printers and WiFi Routers
This is a DC UPS for router and printer using capacitors instead of battery.It running the load for ...
-
12V to 220V Inverter
This circuit is an Unusual Inverter with Staistep output waveform that convert 12V or 24V DC into 22...
-
220V LED Driver
This is a 220V constant current LED driver circuit using IC RM9003 (Or ICL1103).Circuit and parts li...
-
DIY 3 phase inverter without microcontroller
DIY 3 phase inverter without microcontrollerCircuit and parts list: https://www.mousa-simple-project...
-
Using Rotary Dial Pad instead of Keypad
Using Rotary Dial Pad instead of Keypad Circuit, parts list and Arduino code: https://www.mousa-simp...
-
Video on Oscilloscope
This Circuit is a Composite Video to analog XYZ signal converter which take s-video signal and displ...
-
Automatic Transfer Switch ATS / Changeover with 3 Input Sources
This circuit is an Automatic Transfer Switch ATS / Changeover with 3 Input Sources (3 ways).It has 3...
-
Full Array Local Dimming TV Backlight
This is a modification to convert an LED LCD TV to Full Array Local Dimming Backlight.Circuit and Pa...
-
Online UPS with Capacitors
This circuit is a short running time online UPS that used high voltage capacitors to stores energy, ...
-
Magnet Polarity detector
This circuit is a Magnet polarity detector using hall effect sensor IC W277.Circuit and Parts list: ...
-
LED Matrix and Lissajous pattern
This circuit is an LED matrix to draw Lissajous pattern/curve .Max frequency less than 10KHz (an edu...
-
DIY Transformerless inverter
This is a DIY Transformerless inverter, it can convert high DC voltage to AC Voltage with Pure sine ...
-
Unusual DIY Vibration Sensor using Analog Voltmeter !!
This circuit is an Unusual way to make Vibration Sensor or Shock Sensor using an Analog Voltmeter !!...
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
240 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
241 0 1 -
-
-
