Pc soundcard scope adapter - 2 channels
1V0 and 1V9/0V0 and 0V9 are 9 volt battery conections (2 of them) ic1, ic5 and ic6 are outputs (1 reference output aprox 280 hz) and two channels. You can use a stereo jack to connect it to a USB soundcard and Voila! Now you have a buck scope!
Also with VR1 and VR2 you cans adjust the output amplitude...
SW1 & SW2 are peak voltage selectors, from 1,4 volt max to 1400 volt max
Pc soundcard scope adapter - 2 channels
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Gabe Hidalgo
-
nixie tubes power supply
A cheap 555 TIMER controlled boost converter!
-
555 timer high voltage boost converter
this SMPS can be powered with low input voltage, from 12 to 24 volt DC and provides adjustabe output...
-
Pc soundcard scope adapter - 2 channels
1V0 and 1V9/0V0 and 0V9 are 9 volt battery conections (2 of them) ic1, ic5 and ic6 are outputs (1 re...
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
126 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
307 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1285 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
735 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3261 2 4
