Dennis van den Broek
NETHERLANDS, THE • + Follow
Tools, APP Software Used etc.
|
Autodesk Fusion 360Autodesk
|
|
|
Revopoint MiracoRevopoint 3D
|
Description
Nintendo 64DD Replacement Shell
If you want to add springs like the original to the doors, you'll need to following spring dimensions: Length: 15mm, Outer Diameter: 2.5mm.
The card details model requires clipping the excess material and filing the edge surfaces smooth for proper operation!
The Front Panel might require some cleanup if the latches don't open up fully (I had to remove some old support pieces by hand from the prints).
Please make sure to order both the feet and the screwposts 2 times for a full build!
CAD-Custom parts and enclosures
Shell Top
64DD_Shell-Top.stl
Shell Bottom
64DD_Shell-Bottom.stl
Feet (2x needed)
64DD_FrontFoot.stl
Front Clamp (originally rubber)
64DD_Front-Fascia.stl
Front Panel
64DD_Front-Panel.stl
Screw posts (m4x60 screws need glueing in) (2x needed)
64DD_ScrewPost.stl
Lightpipe (translucent)
64DD_Lightpipe.stl
Small parts [combined] for Front Panel mechanisms
64DD_DetailsCard.stl
Mar 10,2025
1,193 views
Nintendo 64DD Replacement Shell
Replacement Shell for your 64DD if broken, or can be used as a display piece in case you just want one to look cool in your collection!
1193
3
0
Published: Mar 10,2025
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial (CC BY-NC)
License.
- Comments(0)
- Likes(3)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Dennis van den Broek
-
Nintendo 64DD Replacement Shell
If you want to add springs like the original to the doors, you'll need to following spring dimension...
-
PC Engine GT/TurboExpress Replacement Shell
Depending on which screen you are gonna install, you can choose between the Original, or the Upgrade...
-
Amiga "Pregnant" Mouse - 3 button version
You can print a new shell for your existing 3-button Amiga mouse, or make use of the project by Boar...
-
SEGA Genesis 3 - replacement housing
I remodelled the 3D Scan data by Wesk to be a clean mesh suitable for Resin Printing.This allows you...
-
Vectrex Controller replacement shell (+ Buttons)
Replacement shell for a vectrex controller, either to make a new one yourself, to repair a broken on...
-
SEGA 32X Cartridge Shell (Repro Replacement)
1:1 Shell replica of a 32X game cartridge, either to use for a repro PCB or as replacement for a bro...
-
CASIO Loopy Controller replacement parts (Shell + Buttons)
This is a full shell replica for the CASIO Loopy Controller you can have yourself printed (or parts ...
-
SEGA Nomad Replacement Shell & Parts
This is a full shell replica for the SEGA Nomad you can have yourself printed (or parts if you only ...
-
Famicom Replacement Controller Shells (P1 + P2)
Replacement Controller Shells for your Famicom, which can be used to fix broken ones or enhance the ...
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
228 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
233 0 1 -
-
-
