Hello there! This is V1 of my project in which I've built a device to help put the idea of locking your car on your mind when you shut it off, after my girlfriend forgot one night and her car got stolen from. This is just the gerber file set for this project, if you want the full tutorial, watch my YouTube video (Here's the link) and check out the Instructable linked in the description there!

Recommended board settings (most of these should already be the defaults):

Board type: Single pieces

Different design in panel: 1

Size: Should be automatically detected

Quantity: Up to you

Layers: 2 layers

Material: FR-4

FR4-TG: TG 150-160

Thickness: 1.6

Min Track/Spacing: 6/6mil

Min Hole Size: 0.3mm

Solder Mask: Up to you, I chose purple because it looks really cool

Silkscreen: Whatever has good contrast with the solder mask color of your choice

UV Printing Multicolor: None

Edge Connector: No

Surface Finish: Either HASL with Lead or HASL Lead Free - Note that the leaded version, while containing lead, will only contain a very small amount. This setting basically determines the kind of tinning that is done on the solder pads of the PCB from the factory, so a very small surface area overall. If you're concerned about the lead, the lead-free option is available, while costing more.

Via Process: Tenting vias

Finished Copper: 1 oz Cu