|
KiCADKicad
|
NatSi-ESP32S3-DevKit
The NatSi-DevKit is an ESP32-S3-based development board that supports 2.4 GHz Wi-Fi and Bluetooth 5; the chip is capable of operating at 240 MHz, and the board features 45 programmable GPIO pins.
The main difference from other development boards is that the NatSi-DevKit includes a micro SD card slot connected via SPI, 1 built-in touch switch, and 2 LEDs The NatSi-DevKit has a compact and elegant design, and its dimensions are compatible with any solderless breadboard available on the market.
NatSi-ESP32S3-DevKit
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Savva Popov
-
SCHRACK TECHNIK LED PANEL
This project was commissioned by Schrack Technik. The project consists of a panel from ARODEM, into ...
-
NatSi-ESP32S3-DevKit
The NatSi-DevKit is an ESP32-S3-based development board that supports 2.4 GHz Wi-Fi and Bluetooth 5;...
-
GPS-Compass
GPS Compass uses a digital magnetometer inside of a IMU unit to use north pole as a reference point,...
-
SUMEC - autonomous MiniSumo robot
SUMEC - is an autonomous MiniSumo robot, that is designed to compete in MiniSumo competitions. MiniS...
-
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
762 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
433 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
2887 2 3 -
RadioHAT - Raspberry Pi radio development platform
2465 0 4 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
4549 0 6
