|
Proteus 8 |
Nano Leaf Flex Linker DOWNLOAD THE GERBERS DO NOT PURCHASE DIRECTLY!
NanoLeaf Linker
FLEXIBLE Replacement Linkers for Nanoleaf Light Panels (NL22 or NL28 models).
they must be done in a 4 layers 0.8mm thickness Rigid-Flex PCB
Flex Part:
2 layers
0.23 FPC Thickness
0.5oz Copper
Rigid Part:
1oz Copper
Nano Leaf Flex Linker DOWNLOAD THE GERBERS DO NOT PURCHASE DIRECTLY!
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(1)
More by CARLOS ARTURO HERNANDEZ
-
1/2 oz dispenser
This dispenser was created as a school project to dose te exact same amount every time its needed, f...
-
Nano Leaf Flex Linker DOWNLOAD THE GERBERS DO NOT PURCHASE DIRECTLY!
NanoLeaf LinkerFLEXIBLE Replacement Linkers for Nanoleaf Light Panels (NL22 or NL28 models).they mus...
-
NanoLeaf Linker
Replacement Rigid Linkers for Nanoleaf Light Panels (NL22 or NL28 models).they must be done in a 0.8...
-
2 water pump automatic controller
This project was created to fully automatize a building where there are 2 trifasic pumps switched by...
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
278 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
357 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1428 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
797 0 1
