|
|
IN-P55TATRGBInolux
|
x 3 | |
|
|
0805 resistor, 130 ohms |
x 1 | |
|
|
0805 resistor, 150 ohms |
x 1 | |
|
|
0805 resistor, 450 ohms |
x 1 | |
|
|
S4B-PH-K(LF)(SN)JST
|
x 1 |
|
KiCad 8.0KiCad
|
Maimai LED - ILM-R1 remake
Remake of the ILM-R1 PCB used for lighting in Maimai arcade cabinet. This is not a 1:1 reproduction but a fully compatible and same light intensity as the original.
BOM
- Inolux IN-P55TATRGB RGB leds (manufacturer ref: IN-P55TATRGB )
- 0805 resistors
- Red: 450 ohms
- Green: 130 ohms
- Blue: 150 ohms
The resistors values have a good tolerance, even on original boards the value differs.
Maimai LED - ILM-R1 remake
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Engineer
-
Programmable Mist Maker - XIAO / QT PY Extension
962 2 0 -
RadioHAT - Raspberry Pi radio development platform
781 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3235 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3860 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4218 2 2
