Logitech g pro x superlight base optimumtech inspired
Custom made 3D-Printable file inspired by the base Optimum Tech used in his G Pro X Superlight Modding video.
In order to reach a low-weight please use a lightweight material when printing. I would recommend anywhere about 20%+ for Infill when printing but what works best for your material/printer will be unique to you.
The base is a direct replacement for the original base and is interchangeable, the base will fit the original skates or 3d-party aftermarket skates designed for the G Pro X Superlight. The base is designed to still fit the power switch slider and keeps all original standoffs. The base however will not fit the G Pro X puck nor the magnetic charger.
Logitech g pro x superlight base optimumtech inspired
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Miki Terny
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
90 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
561 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
550 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
757 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
716 0 1
