Sam Treadgold

UNITED STATES OF AMERICA • + Follow

Dominik Wodzick

GERMANY
- 0
- 0
1

Components

	HDMI Edge Female Connector	x 2
	QTLP600CAGTR Everlight Electronics Co Ltd	x 8
	0603 SMD Resistor 10k	x 8
	2.54mm Header Pins (40)	x 1
	2pin 2.54mm Screw Terminal Blocks	x 4

Description

ISS Mimic - HDMI Shield

ISS Mimic is a project to create a 1% scale 3d-printed model of the International Space Station (ISS) that utilizes hobbyist electronic equipment to rotate all of the moving joints on the ISS using actual data transmitted from the ISS in real time. Our objective is to enable anyone in the world to visualize exactly what the ISS is doing at any time in order to spread public spaceflight awareness and further STEM engagement.

This is the HDMI breakout board used to split out the signals for use by the SARJ/TRRJ/and BGA motors.

Check out our project: https://www.youtube.com/watch?v=W9iZBjzOEEQ

https://github.com/ISS-Mimic/Mimic

https://discord.gg/zPKyE6hBSe

Code

https://github.com/ISS-Mimic/Mimic

Download Gerbers Download BOM(Bill of materials)

Nov 24,2020

1,336 views

ISS Mimic - HDMI Shield

2 Layers PCB, 86 x 56 mm, 1.6 mm Board Thickness, Black Solder Mask, White Silkscreen 5x quantity

1336

Published: Nov 24,2020

Standard PCB

Download Gerber file 4

BOM(Bill of materials)

PCBWay Donate 10% cost To Author

File Last Updated: 2023/04/30 (GMT+8)

File update record

2023-04-3010:53:26

Gerber file is updated.

Only PCB

PCB+Assembly

Add to cart

*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.

Copy this HTML into your page to embed a link to order this shared project

Copy