Top Overlay
Bottom Overlay
Top Solder Mask
Bottom Solder Mask
Top Copper Layer
Bottom Copper Layer
Mechanical Layer 1
Bottom
Top
IMST iC880a LoRaWAN backplane (rev v1.2)
### DESCRIPTION
This is a very simple board to connect a Raspberry Pi (any model, Zero, 1, 2, 3, A, B, B+) to an IMST iC880a LoRaWAN concentrator board. Nothing fancy, just a way to get rid of the jumper wires. This version is sold as a kit (i.e. the headers are not soldered)
It is compatible with this installation instructions/script created by The Things Network Zurich.
IMST iC880a LoRaWAN backplane (rev v1.2)
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
More by Gonzalo Casas
-
Programmable Mist Maker - XIAO / QT PY Extension
1016 2 1 -
RadioHAT - Raspberry Pi radio development platform
822 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3277 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3901 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4278 2 2
