|
STM32F413RGT6STMicroelectronics
|
x 1 |
|
FreeRTOS |
|
|
LVGL GUI Framework |
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
This is my “OpenTemp” project! It is a highly compact, pocket-sized thermal imager/infrared thermometer with a vast measurement range of -40 to 300°C. It is capable of achieving precise infrared radiation measurements corresponding to ±1.5°C (or ±0.2°C up close) in addition to a wide FOV of 110° at 768 FIR pixels of resolution. It runs off an STM32F413 with thermal imaging handled by an MLX90640.
This project can be useful for various applications such as human/animal detection, non-contact temperature measurement, or identifying any places of unusual heating. I have used it multiple times already to help troubleshoot PCBs (excessive heat usually indicates something is wrong), and even check how hot my coffee is without sacrificing tongue cells. In addition, all the data is interpolated via bilinear interpolation for a smooth and well-rounded image.
Everything there is to know about this project is documented further in detail on my website for free here if you're interested!
(If you get a pop-up, just click "DISMISS" at the bottom)
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(9)
- Julius C Nov 26,2024
- Goran Nyko Nov 19,2024
- Prasanna K Nov 14,2024
- Razvan Costache Nov 13,2024
- Engineer Nov 13,2024
- K M Nov 10,2024
- Jo Jonas Nov 10,2024
- Engineer Nov 09,2024
- (DIY) C64iSTANBUL Nov 08,2024
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Justin Atkins
- High Precision Thermal Imager + Infrared Thermometer | OpenTemp This is my “OpenTemp” project! It is a highly compact, pocket-sized thermal imager/infrared thermome...
- ESP32-Based Wireless Smartwatch | LiDAR and WiFi Scanning This is my “Gateway” smartwatch project! It acts as a compact wireless access key to control all you...
- Solder Sustainer | Effortless One-Handed Soldering This is my Solder Sustainer v2 project! The predecessor of my first version that I built and designe...
- Solder Sustainer | Effortless One-Handed Soldering This is my Solder Sustainer project! It allows the user to solder with only one hand by directly ext...
-
-
-
-
-
X-mas ball, Now with ANIMATED LIGHTS!
30 2 2 -
-
-
-
RC radial engine spark plug heater
19 0 0 -
-