Components

	Teensy 2.0	x 1
	Molex Easy-On 14-pin 1.25mm pitch FFC connector 39-53-2145	x 1
	Molex Easy-On 8-pin 1.25mm pitch FFC connector 39-53-2085	x 1
	1/10" pitch thru-hole headers for Teensy	x 1

Description

HHKB Lite 2 - Teensy 2.0 controller

This is a QMK-compatible replacement controller for the HHKB Lite 2, identified by model numbers PD-KB200W/U or PD-KB200B/U.

This Lite version of the HHKB is a membrane keyboard and not exactly popular compared to more expensive Professional versions that use Topre switches. But the wiring is simple and is a good first project for modding commercial keyboards.

This replacement uses a Teensy 2.0, which is cheap, has plenty of pins, and works well with the QMK firmware. The entire controller board is replaced, so you will lose the built-in USB hub. You will gain all the benefits of the powerful QMK and similar Teensy-supported firmware.

Code

https://github.com/thirteen37/HHKB-Lite-2-Teensy

Download Gerbers

May 23,2020

3,068 views

HHKB Lite 2 - Teensy 2.0 controller

2 Layers PCB 48 x 72.4 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen

QMK-compatible replacement controller for the HHKB Lite 2, identified by model numbers PD-KB200W/U or PD-KB200B/U

3068

Published: May 23,2020

Standard PCB

Download Gerber file 7

PCBWay Donate 10% cost To Author

Only PCB

Add to cart

*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.

Copy this HTML into your page to embed a link to order this shared project

Copy