GB CART FRONT EINK
Basic front cartridge shell design, with interior bracket for centering e-ink display within the label recess of the cartridge. There is NO hole for the display, so you must print this in clear resin to see the e-ink screen.
GB CART FRONT EINK
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Brendan b_2_3_n
-
GB CART FRONT (just thumb minimal)
screw hole requires brass insert, Brass Screw-to-Expand Inserts for Plastic, 0-80 Thread Size, 1/8" ...
-
GB CART FRONT (minimal)
print at your own risk. print can be warped and require additional post work to fit. but at least it...
-
GB CART REAR (flex pcb)
This rear shell ONLY works with a flex pcb. The back has been thickened up to compensate for a thin ...
-
GB CART FRONT EINK
Basic front cartridge shell design, with interior bracket for centering e-ink display within the lab...
-
GB CART REAR (minimal)
Game Boy custom cartridge rear half. No screw hole, just a simple design. This is meant to be printe...
-
GB CART FRONT VERTICAL RIB
Game Boy custom cartridge front half. No thumb indent, no screw post, just a cool design. This is me...
-
Programmable Mist Maker - XIAO / QT PY Extension
1261 2 1 -
RadioHAT - Raspberry Pi radio development platform
1077 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3475 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4124 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4503 2 2
