Extremely Simple Christmas Tree #2
This is a really simple Christmas tree with 5mm leds and CR2032 coin cell battery that anyone can build and assemble.
You will need 7 5mm LEDs of your choice (Can be static or flashing...), 7 1206 Resistor (Value depend on the brightness you need. Anything between 150 ohm to 1 kilo ohm will be ok) and 1 2032 Coil cell battery holder (SMD Version).
Assembling this PCB is very easy and I recommend it for practicing soldering.
Let me know if you have any change in mind for next versions. Also this board has another version with different design.
Merry Christmas in advance to everyone.
Extremely Simple Christmas Tree #2
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Skopus
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
150 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
319 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1317 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
750 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3285 2 4
