Gary Watts

AUSTRALIA • + Follow

Engineer

POLAND
- 0
- 0
blockofdynamite

UNITED STATES OF AMERICA
- 0
- 1
Engineer

INDIA
- 0
- 0
3

Components

	ESP32-CAM	x 1
	2.54MM male and female headers	x 3
	Mini USB Socket XM7D-0512	x 1
	optional 5mm screw terminal	x 1
	optional 5v stepdown buck converter	x 1
	optional 100uf electrolytic capacitor	x 1

Description

ESP32-CAM Adaptor PCB

This is an adaptor PCB for the ESP32-CAM. The ESP32-CAM does not come with USB and requires a FTDI adaptor to program it. Normally this requires a bunch of Dupont cables and poking around. This PCB makes flashing the ESP32-CAM plug and play. A header is provided to put the device into flash mode while another header lets you choose if you want to flash at 3.3v or 5v. (ensure your FTDI adaptor is set to the same before plug in). The ESP32-CAM can be powered by the onboard Mini USB (chosen as it is a through hole variety and easier to solder) or a via a screw terminal and 5v step down buck converter. This will allow powering the device at much higher voltage levels.

Schematic and Layout

https://www.inspectmygadgets.com/an-esp32-cam-adaptor-pcb/

Nov 15,2020

3,504 views

ESP32-CAM Adaptor PCB

2 Layers PCB 35.3 x 51.3 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen

An Adaptor PCB for the ESP32-CAM to allow easier programming and powering of the device.

3504

Published: Nov 15,2020

Standard PCB

PCBWay Donate 10% cost To Author

Only PCB

Add to cart

*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.

Copy this HTML into your page to embed a link to order this shared project

Copy