A very handy quick prototyping board for the ESP32S3DevKit-C module from Espressif, the board has an 830 tie point solder less prototyping area to allow you to add peripheral circuitry to interface with the ESP32 module the board allows you to easily interface any pin connection on this module to either the prototyping area or pin headers for IO purposes. The board features four color LED's that can be connected to any IO pin as well as four push-button circuits with pull-ups that can be used to connect to any IO pin as inputs. The board has RS232 serial header as well as a I2C serial pin header and includes a standard 10 pin JTAG connector for programming or debugging. The board has its own power supply which gets its power from a 9-12 VDC wall cube. The board offers the following regulated power supply voltages: 5Vdc, 3.3Vdc, +/- 5 or 3.3Vdc (using an onboard voltage inverter) and a precision 2.5V reference.