|
Rhino 8 |
Custom resin Synthstrom Deluge side panels
Alternative side panels for the Synthstrom Deluge to replace the original wooden ones.
The example in the photo was printed using Resin PWR Dark Black.
When installing the panels for the first time, make sure to pre-tap the holes using one of the screws to avoid splitting the resin. Don’t screw all the way in at once, screw in and out several times to help remove small particles from tapping.
Custom resin Synthstrom Deluge side panels
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Vladimir Fer
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
278 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
358 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1428 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
797 0 1
