Colloidal Silver Generator
Construction of a Colloidal Silver generator with Arduino. The generator is programmed to produce 200mL of colloidal silver, with concentrations to choose between 10 and 100 ppm. Colloidal silver is composed of high-purity silver nanoparticles, which remain suspended in purified water. Silver nanoparticles measure between 5 and 100nm, and have a positive electrical charge due to the electrolysis process used in their production. Colloidal silver could be considered a homemade antibiotic, perhaps due to its lack of commercial interest from pharmaceutical companies.
PCB Adapter for 2x16 LCD
https://www.pcbway.com/project/shareproject/Adapter_for_2x16_LCD_aa868d30.html
Colloidal Silver Generator
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(9)
- Likes(3)
More by José Ramón PUEYO MUÑOZ
-
Multipurpose CPU, with AT89S52 (SMD)
### DESCRIPTIONMultipurpose CPU, with AT89S52 (SMD)This CPU is designed to work with the 7 segment S...
-
ISP Shield programmer for ATmega / ATtiny
I have used these PCBs in an ISP programmer Shield for ‘Arduino UNO’. This programmer is compatible ...
-
Adapter for 2x16 LCD
The PCB is mounted on the back of a 2x16 LCD display (large or small) and concentrates its output co...
-
Colloidal Silver Generator
Construction of a Colloidal Silver generator with Arduino. The generator is programmed to produce 20...
-
DCF77 experimental transmitter
DCF77 experimental transmitterConstruction of a simple transmitter of 77.5 KHz, to be able to set ti...
-
Intelligent switch
### Intelligent switchThe idea of this assembly is to get the automatic shutdown of a series of devi...
-
PCB_Display_2x7
### DESCRIPTIONDouble 7 segment display with serial controlDesign of a 7-segment SMD display, with s...
-
Programmable Mist Maker - XIAO / QT PY Extension
1102 2 1 -
RadioHAT - Raspberry Pi radio development platform
916 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3346 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3961 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4351 2 2
