steering_rack_mk5 - Part 2 v5
Nearly unbreakable steering rack if SLM printed in Aluminum.
Made to be beefier than even the aluminum "upgrade" parts commercially available that you HAVE TO modify and weaken significantly to even use.
These are double shear everywhere, with tappable holes to reduce the use of fiddly nuts.
I have printed in ASA-GF and it survived about as long as the aluminum "upgrade" steering rack from Team Associated. So far the SLM printed ones made from Aluminum by PCBWay have held up better than even the car itself, plus it increased the speed, bump steer and accuracy of the steering with Trencher X tires, as there is no longer a huge bunch of flex in the steering rack itself.
steering_rack_mk5 - Part 2 v5
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Randy Wimer
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
456 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
827 3 6 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
792 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
1024 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
888 0 1
