BFFB GPIO Cover 1 of 3
This is for the BFFB Board made by https://www.justcallmekokollc.com/. This is for the GPIO Pin section. This is part 1 of 3 there are 2 more parts that need to be printed. Will include them here when they are approved.
Print in: Resin UTR-8100 (transparent)
BFFB GPIO Cover 1 of 3
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by ELLO Mate
-
BFFB BACK Cover 3 of 3
This is for the BFFB Board made by https://www.justcallmekokollc.com/. This is for the BACK COVER. T...
-
BFFB FRONT Cover 2 of 3
This is for the BFFB Board made by https://www.justcallmekokollc.com/. This is for the FRONT COVER. ...
-
BFFB GPIO Cover 1 of 3
This is for the BFFB Board made by https://www.justcallmekokollc.com/. This is for the GPIO Pin sect...
-
FLIPPER ZERO WIFI BOARD TOP CASE 2 of 2
This is for the flipper zero wifi board this is the TOP of the case you will need to print the botto...
-
FLIPPER ZERO WIFI BOARD BOTTOM CASE 1 of 2
This is for the flipper zero wifi board this is the bottom of the case you will need to print the bo...
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
150 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
319 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1319 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
750 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3287 2 4
