Automatic roller blinds small remote
A small 30x50x20mm remote with 5 buttons, and an OLED screen. This project is used to control the automatic roller blinds motor project, but you are welcome to adapt the code for yourself; it can be used to control anything with a NRF24L01 module. Built around an Arduino pro mini.
It has a battery life of a few months.
For more details, build instructions, source code, 3D files, schematic and PCB see the github project
Automatic roller blinds small remote
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
More by Twinsen
-
Automatic roller blinds web interface
A small NRF24L01 to Wifi gateway. This project is used to control the automatic roller blinds motor ...
-
Automatic roller blinds small remote
A small 30x50x20mm remote with 5 buttons, and an OLED screen. This project is used to control the au...
-
Automatic roller blinds motor
Automatic roller blinds motorAutomatic window roller blinds that can be controlled wirelessly using ...
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
126 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
311 0 0 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1286 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
737 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3264 2 4
